How I can install electric motors in RC airplanes?

1 ANSWERS

1. kate
   

    The installment of the electric motor in your RC airplane will give you safe and enjoyable flights. Mounting the motor securely ensures that the plane will operate as expected, flying at level and at a consistent speed, without sudden plunges. Most motors available with mounts specially built for quick installation. Those mounts have the proper angles already set, so that all you need to do is s***w the mount and motor in place and connect the wires. In well under an hour your engine can be in place and your plane ready for flight. . For more convenience you can use these steps:
   • Place the engine mount for your motor against the firewall and mark the s***w holes onto the firewall with a pencil.
   • Now s***w the anchor bolts that will hold your engine mount in place into the firewall and use the marked holes so that bolt holes are flat with the surface of your firewall.
   • Line up the engine mount with the anchor bolts and s***w it into place.
   • Now attach the electric motor to the engine mount and pull the motor cables into the plane cavity.
   • Mount the battery pack on the plane, placing it either into the cavity of the plane or on the side. Secure the battery pack in place using plastic ties.
   • Connect the airplane battery pack wires with the electric speed controller.
   • Now place the propeller on the motor and secure it in place by tightening the propeller nut.
   • Move the shrink tubing over the wire connections and apply heat using a hairdryer to shrink the rubber to a tighter fit.

   Report (0) (0)  |   1 year, 2 month(s) ago