Opening my old Meilink 20 cu foot safe

1 ANSWERS

1. Leonardo
   

   The correct dialing sequence is as follows: 4 times left TO the first number, 3 times right TO the second number, 2 times left TO the third number, 1 time right, slowly until the dial stops. Left is counter clockwise, right is clockwise. Do not count the revolutions of the dial, count the individual number as it ARRIVES at the index mark at 12 o'clock. Unless 0 is part of your combination - forget it! There are only three reasons that a safe lock will not open: 1. incorrect combination, 2. incorrect dialing sequence, 3. mechanical problems, If you don't have any mechanical problems, and you are positive you have the correct numbers, then dialing sequence is your problem. If you are dialing it correctly and it doesn't open, then you may have the wrong combo. Try adding/subtracting (+/-) one from each number and redialing, also. hope this helps,

   Report (0) (0)  |   2 years, 7 month(s) ago