Ionaization Smoke Alarm 1275 how do i stop it from beeping, hitting the hush button does nothing

5 ANSWERS

1. Guest18014088
   

   i have changed the batteries in all 6 alarms and they are still chirping all day and night. THE only way they stop is cut off my breaker in the box .

   Report (0) (0)  |   2 years, 1 month(s) ago  

2. Guest16176029
   

   Tried all of the above and when re-connected it beeps the other alarm in the living room that is wired in series but not this unit when it is re-connected maybe this unit is bad (the whole thing is driving me crazy ready to can both of them and install regular battery operated ones only!!!!!!!!!!!!!!

   Report (0) (0)  |   2 years, 3 month(s) ago  

3. Guest14938044
   

   I have replaced the battery in mine but it still keeps chirping.

   Report (2) (1)  |   2 years, 5 month(s) ago  

4. Guest13884745
   

   Change the battery. To do that, remove the pin in the ring trim by pulling it straight out. Then turn the whole device in the direction of the arrow on the cover (toward "off"). When it comes loose, it will be connected to wires from the ceiling by a quick release connector -- squeeze the sides of the connector and pull it off. This will expose the batter compartment - follow the directions for replacing the 9V battery. Then replace the quick release connector, s***w the device back onto the trim rim (taking care to line up the holes for the pin), replace the pin, and you're done!

   Report (1) (4)  |   2 years, 6 month(s) ago  

5. Guest11431020
   

   I am in the same boat, I have a constant headache, I cannot sleep (its in my bedroom) !!!!

   Report (0) (0)  |   2 years, 8 month(s) ago