Instructions to Drive a car with mannual Transmission?

1 ANSWERS

1. ZZ
   

   Looking at the floorboard, you'll see 3 pedals. From left to right, they are: Clutch, brake, gas. Study the simple diagram on the top of the gearshift, which will show you where the gears are. In most of the cars First, third and fifth gears are at the top of the legs: second, fourth and reverse gears are at the bottoms. Make sure the parking brake is engaged and the car is on a flat surface in an area where you have plenty of room. Press down the clutch pedal and then move the gearshift into the neutral position. start the car. keeping the clutch pedal down, put the car into first gear by moving the gearshift into the top left position. Apply the foot brake and release the parking brake. Release the foot break when you're ready to start moving. Begin to release the clutch pedal slowly, when you hear or feel the engine begin to slow down, slowly press down on the gas pedal as you continue to release the clutch. The car will start moving forward. Accelerate until the car reached about 3,000 rpm, then take your foot off the gas, press down on the clutch pedal, and pull the gearshift directly down through neutral to second gear. be sure to pull the gearshift down until it can't any farther. Release the clutch pedal gently, and at the same time pressing down gently on the gas pedal. Repeat the shifting process each time you hit 3,000 rpm until driving at the desired speed to want to be at. Downshift by releasing the gas pedal when you want to decrease your speed. press down on the clutch and move the gearshift through neutral into the next-lower gear. Once you're in the lower gear, release the clutch slowly and brake as you do so. Drive in reverse by following the same steps you would for starting in first gear. the reverse gear engages more quickly than first gear, however, so be sure to release the clutch slowly and begin to press the gas pedal as soon as the car begins to move.

   Report (0) (0)  |   1 year, 7 month(s) ago