Question:

I have a kenemore quiet guard 2 the red light blinks and it wont run

by Guest13101392 | 2 years, 3 month(s) ago

I have a kenemore quiet guard 2 the red light blinks on the quickwash for a while than it blinks on the blinks on washing. It stopped with standing water in it some time ago I got the water out. If you hit hi temp the quick wash and the washing light blink red at the same time.

Tags: blinks, Guard, kenemore, light, Quiet, red, run, wont

Report

Answer The Question I've Same Question Too

Follow Question

1 ANSWERS

Sort By: Date | Rating

Leonardo

Press the heated dry button, then press the normal wash button. Press the heated dry button again and press the normal wash button again. Then let it do its thing. If all the lights go out and it does not run a complete cycle, then press normal wash and start to see if it will run the cycle. To speed up the test cycle, he said you can press Start several times slowly to get it to go to the next cycle one at a time. You will see the red lights change from sensing to washing to drying and so on until it goes to clean. Then try to wash some dishes and see if it works. If that didn't solve the problem, he said it could be that there is food or other items stuck in the bottom and needs to be cleaned out. Just remove the spray arm on the back and top of the dishwasher by the 2 screws and take it out of the dishwasher. Then remove the screws at the bottom and take the screen out to get to the tray at the bottom to see if there is food stuck in there. Pay attention to how you took it apart though, so you can put it back properly. Also check the spray arm and run water through it to remove anything that might be stuck in it. If that doesn't solve it, he said it could be the heater or your motor or possibly wires burned out. I am looking at trying to remove my motor now to see if I can replace it and check that before I pay any money unnecessarily. My repair guy is so busy that he tries to help me over the phone before he comes out. Great Guy. He said that if it is the motor, the charge to replace it is not worth fixing, but if the repair is only 100 to 200, that is definitely cheaper than the cost a the same kind of dishwasher I am planning on purchasing to replace it. They say that because the do not want to work on it. A lot of times they do charge more than it's worth though, so you have to get an estimate concerning your worst possible problem before hand so you can make up your own mind. Hope this helped you.
Report (0) (0) | 2 years, 3 month(s) ago