How to remove harmonic balancer bolt on a 1991 elite oldsmobile 98 is harmonic balancer bolt left handed or right handed thread?

2 ANSWERS

1. Angelina
   

    Take it off as you would a usual bolt. It is a 'Right Handed' thread. Use a breaker bar or influence wrench. Furthermore utilised a breaker bar with a 15/16 inch socket. Location the breaker bar up contrary to the border and after eliminating the spark close wires at the coil tapped the ignition key. It took a while but finally it came loose.
   By utilising Right hand, it’s got many of torque so I get then misplace by utilising an additional long breaker bar and bumping the starter. Just confirm you've got it braced contrary to certain thing solid (like the ground or driveway etc.) because you don't desire it falling and tearing certain thing up.
   Harmonic Balancer Bolt on 1995 Isuzu Rodeo Left Hand not threaded, but they are torqued on at 125 to 130 ft. lbs and as an outcome, very hard to get smashed loose.
   In eliminating the tensioner pulley from a 90 Olds Regency 98 3.8L FI motor is the pulley bolt a left hand gist or right hand gist, The bolts are right hand gist (BUT) you don’t desire to eliminate the bolt in the center of the pulley. You have to restore the tensioner and bracket assembly. There are numerous pounds of force on the tensioner spring.

   Report (0) (0)  |   1 year, 1 month(s) ago  

2. Guest3715089
   

   i HAVE A 92 OLDS 98.. BELT BROKE AND DAMAGE THE STUFF BEHIND THE HARMONIC BALANCER. HAVE TRIED IMPACT AT 120 PSI, AND CRANKING THE NGINE WITH A SICKET AND BREAKER BAR ATTACHED. ANY OTHER SUGGESTIONS?

   Report (0) (0)  |   3 years ago